Name: Baofeng UV-5R
Brand: Baofeng
Rating: 4 (1 reviews)

Baofeng UV-5R

To program repeater 146.985, minus offset, 100 Hz tone, low power level, into Channel#010

Turn on radio.

If in Memory Mode switch to VFO Mode (VFO/MR)

Select 5 KHz Step - (MENU + 1 + MENU) (Use the   key for 5K) (MENU + EXIT)

Enter 146.985 The receive frequency

Press [MENU] + 2 + [MENU] Use the   key to select Low Power

Press [MENU] + [EXIT] To accept and exit

Press [MENU] + 5 + [MENU] Use the   key to select Wide Bandwidth

Press [MENU] + [EXIT] To accept and exit

Press [MENU] + 1 + 3 + [MENU] Use the   key to select 100 Hz Tone

Press [MENU] + [EXIT] To accept and exit

Press [MENU] + 2 + 7 + [MENU] Enter 010 or Use the   key to select 010

Press [MENU] + [EXIT] This stores the Receive Frequency

Radio prompts that REC FREQ has been stored

Enter 146.385 The transmit frequency

Press [MENU] + 2 + 7 +

[MENU] + [MENU] + [EXIT] Radio prompts that TX FREQ has been stored

Return to Memory Mode (VFO/MR)

Other manuals for Baofeng UV-5R

Questions and Answers:

Need help?

Do you have a question about the Baofeng UV-5R and is the answer not in the manual?

General