Baofeng UV-5RV2+ - Page 43

http://www.baofengradio.us 43
http://baofengradio.us
15
ANI (Automatic Number Identification) Can only be configured by PC
software.
16
DTMFST (The DTMF tone of transmitting code.)
OFF/DT-ST/ANI-ST/DT+ANI
17
S-CODE (Signal Code) Can only be configured by PC software.
1,…,15 groups
18
SC-REV (Scan Resume Method)
TO/CO/SE
19
PTT-ID (press or release the PTT button to transmit the signal code)
OFF/BOT/EOT/BOTH
20
PTT-LT (delay the signal code sending)
0,…,30ms
21
MDF-A (In channel mode, display channel A) Note: channel display
name can only be configured by PC software.
FREQ/CH/NAME
22
MDF-B (In channel mode, display channel A) Note: channel display
name can only be configured by PC software.
FREQ/CH/NAME
23
BCL (Busy Channel Lockout)
OFF/ON
24
AUTOLK (Keypad Locked Automatically)
OFF/ON
25
SFT-D (Direction of Frequency Shift)
OFF/+/-
26
OFFSET (Frequency Shift)
00.000…69.990
27
MEMCH (Stored in Memory Channels)
000,…127
28
DELCH (Delete a Memory Channel)
000,…127
29
WT-LED (display illumination color during standby)
OFF/BLUE/ORANGE/PURPLE