EasyManua.ls Logo

Baofeng UV-5RV2+ - T-DCS (Transmit DCS); T-CTCS (Transmit CTCSS)

Baofeng UV-5RV2+
74 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
http://www.baofengradio.us 51
http://baofengradio.us
Menu Item
Shortcut
Description
T-DCS
12
Transmit - Digital Coded Squelch (DCS): Transmits a specific low level digital signal to unlock the
squelch of a distant receiver (usually a repeater).
Availability: MR/Channel Mode (Read Only), VFO/Frequency Mode, Separate VFO A & B Settings, Stored in Channel
Settings/Notes
OFF [0] | see DCS Table Default: OFF
Note: When T-DCS is not set to OFF, 'DCS' is indicated to the left of the upper channel display (requires TX or ‘reverse’ mode).
Note: Setting T-DCS sets menu 13 to OFF.
Menu Item
Shortcut
Description
T-CTCS
13
Transmit Continuous Tone Coded Squelch System (CTCSS): Transmits a specific and continuous
sub-audible signal to unlock the squelch of a distant receiver (usually a repeater).
Availability: MR/Channel Mode (Read Only), VFO/Frequency Mode, Separate VFO A & B Settings, Stored in Channel
Settings/Notes
OFF [0] | see DCS Table Default: OFF
Note: When T-CTCS is not set to OFF, ‘CT’ is indicated to the left of the upper channel display (requires TX or ‘reverse’ mode).
Note: Setting T-CTCS sets menu 12 to OFF.