http://www.baofengradio.us 62
http://baofengradio.us
SITE [0] | TONE [1] | CODE [2] Default: TONE
SITE: Sounds alarm through the radio speaker only
TONE: Transmits a cycling tone over-the-air
CODE: Transmits '119' (911 in reverse?) followed by the ANI code over-the-air
Note: Recommended setting is SITE
BAND Selection: In VFO/Frequency mode, sets [A] or [B] to the VHF or UHF band.
Availability: MR/Channel Mode (Read Only), VFO/Frequency Mode, Separate VFO A & B Settings, Stored in Channel
VHF [0] | UHF [1] Default: VHF
Note: When transitioning from VHF to UHF or from UHF to VHF, the selected band's low frequency limit becomes the displayed
frequency (the original 'scratch' frequency is lost)
To Next Page
Loading...