Need help?Do you have a question about the Baofeng UV-82HP and is the answer not in the manual?
General| Battery Capacity | 1800 mAh |
|---|---|
| Channels | 128 |
| Modulation Mode | FM |
| Antenna | High gain dual band antenna |
| Operating Temperature | -20°C to +60°C |
| Waterproof | No |
| Frequency Range | VHF: 136-174 MHz, UHF: 400-520 MHz |
| Power Output | 1W |
| Operating Voltage | 7.4V DC |
| Antenna Impedance | 50 ohm |
| Channel Spacing | 25 kHz (wide band) / 12.5 kHz (narrow band) |
Guide to the initial setup process for the BaoFeng UV-82HP radio.
Fundamental operations for using the BaoFeng UV-82HP radio.
Essential safety precautions for operating and maintaining the radio equipment.
Guide on how to properly mount the antenna to the transceiver.
Procedure for safely attaching and removing the battery pack.
Step-by-step guide for connecting the charger and charging the radio.
Recommendations for maximizing battery lifespan through correct charging and handling.
Identification of the antenna component on the radio overview.
Details on using the dual PTT rocker switch for transmitting on separate VFOs.
Instructions on how to turn the radio on/off and adjust audio volume levels.
Steps to power on the BaoFeng UV-82HP radio.
Steps to power off the BaoFeng UV-82HP radio.
Explanation of the two radio modes: Frequency (VFO) and Channel/Memory (MR).
Procedure for basic navigation and selection within the menu.
Instructions on using numerical short-cuts for direct access to menu items.
Using the default dual PTT switch for dual watch operations.
Using single PTT mode for dual watch, requiring software configuration.
Detailed steps for programming channels manually using the radio's interface.
Procedure for storing simplex channels into memory.
Instructions for configuring the radio for repeater communication.
Step-by-step guide for configuring repeater frequencies, offset, and direction.
To Next Page