bar 670 - Pre-Operate Inspection; Engine Oil Check and Capacity

·
8
·
III. PRE-OPERATE INSPECTION
1. engine oil
• Engine oil is a key factor in deciding the engine’s performance. Do
not apply engine oil with additives or 2-stroke gasoline engine oil,
because they haven’t enough lubrication, and may shorten the engines
service life.
• Check the engine with it stopped on a level ground.
Use 4-stroke engine oil for API service classication SE class
or equivalent, and always check API service label on the oil container
to be sure it includes the letters SE or equivalent.
Check method:
1) Remove the dipstick and clean it.
2) Reinsert the dipstick into the oil lling hole without screwing it, and
check oil level.
3) If the oil level is too low, add the recommended engine oil up to the
oil upper level.
ENGINE OIL CAPACITY: 670 2.0L
ENGINE OIL RECOMMENDED: SAE10W-30
PRE-OPERATE INSPECTION
sae
environment temperature