bar 670 - Exhaust Control System Service; Maintenance; Replacing Parts; Tampering and Altering

·
16
·
VII. EXhAUST CONTROL SYSTEM SERVICE
With the engine running, carbon monoxide, oxide of nitrogen and
hydrocarbon will produce, and in certain conditions, oxide of nitrogen
and hydrocarbon will react chemically each other to make smoke while
carbon monoxide is toxic, so exhaust control of them is very important.
The company decreases the exhaust emissions by introducing poor-fuel
carburetors and other devices into the engine to solve the problem.
To keep the exhaust of your engine with in the standard exhaust emission,
pay attention to the followings:
1. Maintenance
Maintain the engine periodically in accordance with the maintenance
schedule in the manual. The maintenance schedule is made out on the
base of normal use in normal conditions, if using under heavy load, dusty
or wet circumstances or in high temperature, service of the engine should
be done more often.
2. replacing Parts
To ensure the best quality and reliability, use only new genuine our
company parts or their equivalents for repair and replacement.
3
.
t ampering and altering
Tampering with or altering the emission control system may increase
emissions beyond the legal limit. Among those acts that constitute
tampering are:
EXHAUST CONTROL SYSTEM SERVICE