9
Preciso
TM
Manual
OPERATION
Before Using Your Grinder
Prior to using your Preciso™ grinder for the rst time you should wash the bean
hopper and ground coffee bin in warm soapy water. See the section on Care
and Cleaning for instruction on how to remove and reinstall these parts. There
may be some rust on the burrs when you receive your grinder. This is normal
and will disappear after a small amount of coffee has been ground. To remove
the rust and season the burrs, grind 1/4 pound of coffee and discard.
Initial Operation
Place the Preciso™ on a level surface and plug into a correct voltage, AC outlet
only. Remove the lid from the hopper by lifting off. Pour the desired quantity of
roasted whole coffee beans into the hopper up to a maximum of 8 oz. Replace
the lid. Ensure the ground coffee bin is fully inserted.
To Next Page
Loading...
