8
9T ROUBLESHOOTING
Problem Probable cause(s)S olution(s)
Fan does not work properly
• Batteries almost empty or inserted incorrectly
• Fan is damaged
• Fan is stuck
• Control knob set to a too low position
Metal component deformed
heat
• Replace batteries or re-insert batteries
• Order new fan. See “7.6O rdering spare parts”
• Free the fan
• Set control knob to highest position and
decrease afterwards
Flames in the charcoal
container
Some deformation is normal and does not require
any actions. If the component is deformed too
much, order a spare part. See “7.6O rdering spare
parts”.
•
• Food too greasy
•
minutes
• Remove excess oil or trim excess fat from your
food
9T
To Next Page
Loading...
