Page 28
Assembly instructions (continued)
b) Attach the motor
c) The motor can be powered with 2 x D-Cell batteries, otherwise, connect the 240V / DC
adaptor wire to the motor.
d) Assemble the Rotisserie as shown. The handle should be removed during cooking. The
support collar fits into the right windshield as shown and should be tightened to the shaft to
prevent the shaft from dislodging from the motor.
If using the rotisserie, first remove the warming rack. For cart models, the warming rack
can be stored when not in use, by attaching it to the back of the cart. For cart models, the
rotisserie shaft and prongs can be stored when not in use on the back of the cart by
hooking the prongs into the cart top vents.
To Next Page
Loading...
