Page 9
Assembly instructions
If you are assembling a cart model or steel island, make sure you have
the separately supplied steel cart (code MC2CBL for 2B, code
MC4CBL for 4B).Assemble the cart(s) before you start on the firebox /
hood assembly.
If you are assembling multiple units together (e.g. 2B and 4B to make
one 6B bbq), assemble the bbqs to their respective carts first.
If you are fitting side shelves and / or a side burner, make sure you
have the separately supplied pack of 2 shelves (code MC2CDFFL) or
pack of 1 shelf + 1 side burner (code MC2CDFSL).
If you are assembling a build-in or a non-steel island, make sure you
have the separately supplied build-in kit (code CDBIKL) and if
purchased, the separately supplied island (code PBIM4L for 4B
alustone island).
If you purchased an island, assemble the island before you start on the
firebox / hood assembly.
If you want to run up to two adjacent gas modules (e.g. 2B and 4B) from
a single gas supply, you will need separately supplied corrugated gas
extension pipe (code: CBGASEXT).
Keep the bbq head resting on its polystyrene foam base until ready to
instal onto the cart or island.
To Next Page
Loading...
