Barco AMM240ED - Chromatic; Visual; Setting

R5912858 /05 AMM240ED16
4.1 Chromatic
About chromatic
The available functions are:
• Color Temp: Change the Color Temperature - D65, D93, SYS-1, SYS-2
• Red: Range 0 — 100
• Green: Range 0 — 100
• Blue: Range 0 — 100
• Gamma: Change the Gamma Value - 1.8, 1.9, 1.95, 2.1, 2.1S, 2.2, 2.3, 2.4, 2.4S, S0, Radiograph
4.2 Visual
About visual
The available functions are:
• Brightness: Adjust the Brightness of Panel (Range 0 - 100)
• Contrast: Adjust the Contrast of Video (Range 0 - 100)
• Phase: Adjust the Phase of Video (Range 0 - 100)
• Chroma: Adjust the Chroma of Video (Range 0 - 100)
• Sharpness-V: Set the Sharpness of Vertical Image (Range 0 - 20)
6
• Sharpness-H: Set the Sharpness of Horizontal Image (Range 0 - 20)
6
4.3 Setting
About setting
The available functions are:
• Scale Mode: Change the Scale Mode - Fill all, One to One, Vertical - Fill, Horizontal - Fill, Fill aspect ratio
• Color Space: Change Color Space between RGB and YUV
• Freeze Frame: Off / On
• Zoom / Pan: Activate zoom/pan OSD
• PIP: Activate PIP Menu
• POP: Activate POP Menu
• PBP: Activate PBP Menu
PIP / POP / PBP function
The following combinations are available:
Main / PIP DVI-I SDI1
SDI2
(Optional)
7
Component
/ RGBs
HD-15 Y/C
DVI-I x o x o o o
SDI1 o x o o o x
SDI2
(Optional)*
x o x o o o
Component
/ RGBs
o o o x x o
HD-15 o o o x x o
Y/C o x x o o x
Advanced operation
6. Available for Y/C and HD/SD SDI1 only
7. When a HD/SD SDI module (optional) is connected, the HD/SD SDI2 is applicated to the PIP/POP/PBP function.