R5900085 /03 ClickShare CSE-200+ 7
1.5 Compliance IC
Canada, Industry Canada (IC) Notices
This device complies with Industry Canada licence-exempt RSS standard (s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
Radio Frequency (RF) Exposure Information
The radiated output power of the Barco Wireless Device is below the Industry Canada (IC) radio frequency
exposure limits. The Barco Wireless Device should be used in such a manner such that the potential for
human contact during normal operation is minimized.
Caution: Exposure to Radio Frequency Radiation.
1. To comply with the Canadian RF exposure compliance requirements, this device and its antenna must not
be co-located or operating in conjunction with any other antenna or transmitter.
2. To comply with RSS 102 RF exposure compliance requirements, a separation distance of at least 20 cm
must be maintained between the antenna of this device and all persons.
Base Unit IC: IC: 21559-R9861521
Button IC (model R9861500D01): 9393B-R9861500D01
Button IC (model R9861500D01C): 9393B-R9861500D01
IC Antenna statement
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and
maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio
interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically
radiated power (e.i.r.p.) is not more than that necessary for successful communication.
This radio transmitter 21559-R9861521 has been approved by Industry Canada to operate with the antenna
types listed below with the maximum permissible gain and required antenna impedance for each antenna type
indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for
that type, are strictly prohibited for use with this device.
Indoor use only warning
Operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to
co-channel mobile satellite systems.
1.6 CE Certification
CE Certification
R9861521EU is fit for use in all European Union countries, EFTA and Turkey.
UKTR
ROPT SI SKSE
LULT NO PLNL
ISHU LI LVIT
ESEL FR HRFI
DKCZ EE IEDE
BEAT CH CYBG
Image 1-1
The CSE-200+ is restricted to indoor use only when operating in the 5150 to 5250 Mhz frequency range.
Hereby, Barco NV declares that the radio equipment type CSE-200+ is in compliance with the Directive 2014/
53/EU. The full text of the EU declaration of conformity is available at the following internet address:
www.barco.com/clickshare/ce/CE_R9861521.pdf (Base Unit)
www.barco.com/clickshare/ce/CE_R9861500D01.pdf (Button)
www.barco.com/clickshare/ce/CE_R9861500D01C.pdf (Button)
Safety
To Next Page
Loading...
Need help?
General
