Do you have a question about the Barco ClickShare CSE-200+ Series and is the answer not in the manual?
Frequency Band | 2.4 GHz and 5 GHz |
---|---|
Video Outputs | HDMI |
Number of Sources on Screen | 2 |
Frame Rate | Up to 30 fps |
Wireless Sharing | Yes |
Wireless Standard | IEEE 802.11 a/b/g/n |
Operating System Compatibility | Windows, macOS, iOS, Android |
Security | WPA2-PSK in stand-alone mode |
Network Integration | Ethernet |
Audio | Via HDMI |
ClickShare Buttons | 2 Buttons included |
Reach | Up to 30m (100 ft) between ClickShare Button and Base Unit |
Compatibility | HDMI |
Operating Range | 30m (100 ft) |
Connectivity | Ethernet |
Power Supply | 100-240 V |
Max Resolution | 4K UHD (3840 x 2160) |
Number of Simultaneous Connections | Up to 16 |
Provides an overview of the safety information contained within this chapter.
Lists the ClickShare products covered by this safety manual and their included accessories.
Key safety warnings and precautions for installation and use of the ClickShare product.
Guidelines for placing the equipment in a suitable environment to prevent damage.
Information on preventing electric shock and when to seek qualified service.
Precautions regarding heat radiation and fire prevention when operating the device.
Advice on checking and maintaining a clean air environment for device operation.
Specifies temperature and humidity limits for device operation and storage.
Defines the intended office and indoor environments for the ClickShare product.
Statement on FCC rules regarding potential interference and user modifications.
Information on RF exposure limits and safe operating distances for the device.
Overview of international safety standards the equipment complies with.
Notices regarding Industry Canada's RSS standards and RF exposure limits.
Details on approved antenna types and gain for compliance with IC regulations.
Warning that operation in the 5150-5250 MHz band is restricted to indoor use.
Information on CE certification and compliance with EU directives for the device.
Specifies channels and maximum EIRP for the 2.4 GHz band operation.
Specifies channels and maximum EIRP for the 5 GHz band operation.