Need help?Do you have a question about the Barco DP2K C and is the answer not in the manual?
General| Brand | Barco |
|---|---|
| Model | DP2K C |
| Category | Projector Accessories |
| Language | English |
Provides general safety instructions, notices on safety, and optical radiation warnings.
Details critical safety instructions for electrical shock prevention and user safety.
Outlines safety measures for handling cooling liquid and cleansing agents.
Explains hazard distance and safety measures related to high brightness.
Details environmental conditions, cooling, and air flow requirements for installation.
Provides instructions and required tools for safely unpacking the projector.
Guides on performing mechanical checks and verifying box content after unpacking.
Outlines the step-by-step process for setting up the projector from A to Z.
Provides guidelines for projector placement, centering, and leveling.
Details mandatory requirements and procedures for installing the exhaust system.
Explains how to connect the projector to the main AC power supply.
Introduces xenon lamps, their handling, and strike/warning policies.
Provides procedures for qualified personnel to remove the lamp house assembly.
Details the process for safely removing the xenon lamp from the lamp house.
Guides on safely installing a xenon lamp into the lamp house.
Explains how to correctly install the lamp house assembly back into the projector.
Describes how to update lamp information via the Communicator Touch Panel.
Details the procedure for realigning the lamp for optimal performance.
Lists available projector lenses with their specifications.
Guides users on how to select the appropriate lens using the lens calculator.
Provides step-by-step instructions for installing a lens into the projector.
Explains the procedure for removing a lens from the projector lens holder.
Details how to adjust lens shift, zoom, and focus using motorized controls.
Describes the adjustment process to achieve a sharp focus plane on the screen.
Overview of the projector's input and communication side, including keypad and ports.
Identifies the keys on the local keypad and their functions.
Details the ICP board, its LEDs, ports, and functions.
Describes the ICP-D, its functions, limitations, and supported IMBs.
Outlines the specifications for ICP-D's HDMI 2.0 interface.
Details the HD-SDI input module and its settings.
Provides information on optional Integrated Media Block (IMB) and Server (IMS).
Describes the communication ports and functionality of the Cinema Controller.
Introduces the ICMP-X assembly, its components, and front face.
Explains the ICMP-X HDD configuration, RAID 5 setup, and degraded mode.
Details scenarios for replacing or reusing hard drives on the ICMP-X.
Provides step-by-step instructions for inserting a HDD into the ICMP-X.
Guides on how to safely remove HDDs from the ICMP-X.
Explains the meaning of HDD status LEDs and troubleshooting for errors.
Describes the ICMP-X status LEDs and the reset button functionality.
Explains the purpose and importance of the Barco ICMP-X device certificate.
Details how to obtain the ICMP-X certificate using a smartphone or control software.
Outlines the parameters available for configuring the ICMP-X using Communicator.
Locates and describes the various communication ports on the ICMP-X.
Details the source input ports on the ICMP-X, including HDMI and DisplayPort.
Explains the requirements and specifications for using Live IP streaming.
Details the DisplayPort interface specifications and supported modes.
Provides detailed specifications for 3G-SDI and HD-SDI signals.
Outlines the specifications for ICMP-X's HDMI 2.0 interface.
Details the specifications for ICMP's HDMI 1.4 interface.
Explains the possibilities and procedures for resetting the ICMP-X.
Introduces the Communicator Touch Panel for digital cinema projectors.
Provides step-by-step instructions for installing the touch panel interface.
Explains how to adjust the position of the touch panel interface.
Details the procedure and checks required to switch the projector ON.
Explains the procedure for safely switching the projector OFF.
Procedure for qualified personnel to remove the projector's lamp cover.
Procedure for qualified personnel to remove the projector's input cover.
Details the steps to remove the projector's front cover.
Explains how to remove the projector's side cover.
Procedure for qualified personnel to remove the projector's rear cover.
Procedure for qualified personnel to remove the projector's top cover.
Steps to open the sealed compartment of the Light Processor Unit.
Instructions for closing the sealed compartment of the Light Processor Unit.
Guides on how to reinstall the projector's top cover.
Explains how to reinstall the projector's rear cover.
Details how to reinstall the projector's side cover.
Guides on how to reinstall the projector's front cover.
Explains how to reinstall the projector's input cover.
Procedure to remove the front dust filter for cleaning or replacement.
Instructions for cleaning the dust filter located on the bottom side.
Instructions for cleaning the dust filter located on the top side.
Provides precise procedures for cleaning projector lenses to avoid damage.
Guides on how to clean the projector's housing with a damp cloth.
Details how to check the cooling liquid level in specific projector models.
Explains how to clean the UV blocker to maintain optimal light output.
Procedure to authorize clearing security warnings after module removal or compartment opening.
Identifies the extended control knobs for red and green channel convergence adjustment.
Details steps to prepare the projector for convergence adjustment.
Provides instructions to converge the red pattern with the blue pattern.
Provides instructions to converge the green pattern with the blue pattern.
Overview of technical specifications for the DP2K-12C projector.
Overview of technical specifications for the DP2K-15C projector.
Overview of technical specifications for the DP2K-20C projector.
Lists the technical specifications for the Integrated Cinema Media Processor (ICMP).
Lists the technical specifications for the ICMP-X.
Provides detailed dimensions for the DP2K-xxC projector in millimeters.
Shows the center of gravity for the DP2K-xxC projector in millimeters.
Provides dimensions for the optional universal pedestal.
Lists various certifications and compliance marks for the projector.
Explains GPIO ports, input voltage, external power supply, and output functionality.
Details pin configurations for RS232, Ethernet, and General Purpose ports.
Provides pin configurations for ICMP-X audio and general purpose ports.
Details pin configurations for DVI-D inputs.
Provides guidance on proper disposal of waste electrical equipment and batteries.
States Turkey RoHS compliance according to the WEEE Regulation.
Lists Barco contact details and importer contact information.
Lists factory locations for manufacturing the projector.
Provides information on how to download product manuals from the website.
To Next Page