Need help?Do you have a question about the Barco DP2K SLP Series and is the answer not in the manual?
General| Type | Digital Cinema Projector |
|---|---|
| Technology | DLP |
| Contrast Ratio | 2, 000:1 |
| Light Source | Xenon Lamp |
| Light Source Life | 1, 500 hours |
| Resolution | 2048 x 1080 pixels |
| Input Connectors | HDMI, DVI |
| Storage Temperature | -20 to 60 °C |
| Lens Options | Various lens options available |
Details crucial instructions to prevent electrical shock, fire, and personal injury.
Explains hazard distance and restriction zones for high brightness projectors.
Details hazard distance requirements for enclosed rear projection systems.
Outlines environmental conditions, power, and weight requirements for installation.
Introduces the PC software for projector configuration and control.
Describes Barco Alchemy software for projector and screen management.
Provides a step-by-step overview of the projector setup process.
Details the procedure for downloading and installing the latest projector software.
Guides through the initial startup and system adjustment procedures.
Instructions for mounting and positioning the projector correctly.
Step-by-step guide for securely connecting the projector to the AC power supply.
Guides users on how to select the appropriate lens using the Barco lens calculator.
Provides detailed steps for safely installing a lens into the projector's lens holder.
Explains how to adjust lens shift, zoom, and focus using the projector's controls.
Details the identification and functionality of the buttons on the local keypad.
Describes the ICP board, its LEDs, ports, and functions.
Explains the communication ports and functionality of the Cinema Controller.
Describes the ICMP, its purpose, and its placement in the projector.
Explains the ICMP's RAID 5 HDD configuration, degraded mode, and recovery.
Details the steps required to safely power on the projector and activate the light source.
Provides instructions for safely powering off the projector and entering sleep mode.
Step-by-step guide for performing Scheimpflug adjustment for image sharpness.
Guides on checking and adjusting the back focal length for proper focus.
Procedure for aligning the blue color channel with the red pattern.
Procedure for aligning the green color channel with the red pattern.
Outlines the steps for luminance and color calibration using the Communicator.
Explains color gamut calibration and the electronic correction process.
To Next Page
