Barco DP2K SLP Series

3. Installation process
3. INSTALLATION PROCESS
About this chapter
After you have unpacked and checked the projector, you can start with the installation process of your DP2K S LP-series projector.
This c hapter gives an overview of all the different stages in the installation process which you have to be followed to s et your DP2K
SLP-series pr ojector up and running. E a ch stage is briefly described and refers to more detailed step by step procedures in this
manual.
Use this o verview as a checklist to ensure that all stages have been followed in the setup process of the DP2K SLP-series
projector.
Let the projector acclimatize to ambient conditions after unpacking. Neglecting this may result in a startup
failure of the light p rocesso r u nit.
Overview
• Installation process ov erview
• Software upgrade
• Startingupandadjustingthesystem
R5906847 DP2K SLP SERIES 02/06/2017
23