15. Removal and installation of the projector covers
15.3 Removal of the top cover
WARNING: Switch off the projector prior to start with this procedure, unless otherwise specified in the pro-
cedure.
To rem ove the top cover from the projector the Com m unicator Touch Panel m ust be removed fi rstifinstalled
on top of the projector. This procedure assumes that the Communicator Touch Panel is not installed on top
of the projector.
Necessary tools
Flat screwdriver 7 mm
How to remove the top cover?
1. Loosen the four captive s crews (reference 1 image 15-3) of the top cover us ing a 7 mm flat screw d river.
2. Remove the top cover from the projector.
1
Image 15-3
134 R5906847 DP2K SLP SERIES 02/06/2017
To Next Page
Loading...
