Barco CSE-200 - User Manual

Other manuals for Barco CSE-200

Installation Manual83 pages

Manual15 pages

Questions and Answers:

R
Rebecca McphersonAug 20, 2025
How to fix bad wireless connection between Barco CSE-200 Button and Base Unit?
- I
  Ian ShieldsAug 20, 2025
  If users experience a bad wireless connection where the connection from the Button to the Base Unit keeps dropping, this may be caused by wireless congestion or low signal strength. To resolve wireless congestion, use a WiFi scanner to find a free wireless channel and select it via the web interface. Free online tools such as inSSIDer or Xirrus can help with this. To address low signal strength: * Move the Base Unit closer to the meeting room table. * Change the orientation of the antennas on the back of the Base Unit. * Remove any obstructions between the Buttons and the Base Unit.
N
Neil GonzalezAug 22, 2025
Why is my screen not shown on the Barco CSE-200 display when pressing the Button?
- D
  Desiree EllisAug 22, 2025
  If your screen is not displayed when you press the Button, it could be because you are the second person trying to share content, as only one screen can appear at a time. In this case, click and hold the button for 2 seconds to use the 'Show me full screen' function. Another reason could be that the ClickShare software is not running. To resolve this, go to the ClickShare drive and run the software.
D
dtaylorAug 25, 2025
How to fix bad WiFi connectivity with Barco Projector Accessories?
- R
  Robert RamseyAug 25, 2025
  Poor WiFi connectivity can stem from several factors. It may be due to congestion of the wireless channel. Use wireless network scan tools to look for free or the least congested channels. Metal cabinets, walls and other construction elements can cause reflections that degrade the wireless signal. Obstructions between Buttons and Base Unit cause lowering of the wireless strength and quality. Try moving the Base Unit to another place in the room and avoid placing it inside cabinets, false ceiling, below the table, behind a wall, or in another room. Re-orient the Base Unit antennas. More information can be found in the ClickShare White paper on WiFi at www.barco.com/clickshare.
S
Sean YangAug 26, 2025
What to do if the image quality on my Barco CSE-200 Projector Accessories meeting room display is unsatisfactory?
- E
  Elizabeth NguyenAug 26, 2025
  If the image quality on the meeting room display is not satisfactory, it might be due to the quality or length of the cable between the Base Unit and the display, or the connection between them. Try replacing the cable or using another cable. Also, try changing the resolution on the web interface to match the native resolution of the meeting room display.
M
Mary LucasAug 28, 2025
What to do if I do not get a CSE-200 drive when inserting the Barco Projector Accessories Button in my laptop?
- M
  Mr. Michael LeeAug 28, 2025
  If you do not get a CSE-200 drive when inserting the Button into your laptop, it could be due to several reasons: * No automatic refresh of drives. * Windows tries to assign the ClickShare drive to an already reserved drive letter. * Bad connection at USB port on the laptop. * Some types of USB devices might be blocked as a company policy. * USB port settings on the laptop might limit the usage of high power USB devices when on battery power. To solve this, try refreshing your view on the laptop or use Microsoft Windows Disk Management to assign it to a free drive letter. Also, reconnect to the USB port, try another USB port, or reboot the laptop. If possible, change the USB port policy on the laptop.
M
Melissa DayAug 29, 2025
How to troubleshoot low video performance on Barco CSE-200 Projector Accessories?
- D
  David DavisAug 30, 2025
  If you are experiencing low video performance, this might be due to laptop performance or wireless connectivity. To improve laptop performance: * Lower the screen resolution of the laptop. * Disable hardware acceleration for video. * Use only a part of the display to show the video. * Right click ClickShare icon in system tray and click on Capture mode to toggle the current setting. For issues related to wireless connectivity, refer to the troubleshooting steps for 'Users have bad connectivity'.
M
Monica GraySep 1, 2025
What to do if my Barco Projector Accessories content is removed from the display and the LEDs on the button are blinking white?
- S
  schultzdonaldSep 1, 2025
  If your content is removed from the display and the LEDs on the button are blinking white, it indicates that the connection to the Base Unit is lost. ClickShare will attempt to restore the connection automatically. If the connection cannot be restored, the LEDs on the Button will start blinking red. In this case, unplug the button from your laptop and try a new button.
S
Steven KennedySep 2, 2025
Why is video not shown on Barco CSE-200 screen?
- B
  brianvelezSep 3, 2025
  If video is not shown on the screen, it could be because the player uses overlays. To resolve this, disable the usage of overlays in the preferences of the video player. Alternatively, the content might use HDCP, which ClickShare does not support; HDCP content will be displayed as black.
C
caldwellglennSep 5, 2025
What to do if some programs of Windows are not shown on the Barco Projector Accessories display?
- S
  Steven WardSep 5, 2025
  If some Windows programs are not shown on the display, it may be due to the use of overlays, 3D, or hardware acceleration in the GPU. Try disabling overlays or hardware acceleration in the GPU, disable AeroGlass in Windows 7, or upgrade the Base Unit to the latest software version.
J
John MartinezSep 6, 2025
What does it mean when using Windows 7 and getting the message about the Windows Aero color scheme being slow with Barco Projector Accessories?
- S
  Scott WrightSep 7, 2025
  When using Windows 7, the message about the Windows Aero color scheme appearing slow indicates that ClickShare uses resources from the GPU. If this occurs in combination with other programs, Windows 7 may suggest disabling Aero to improve laptop performance. It is safe to ignore this message and choose 'Keep the current color scheme'.

Barco CSE-200 Specifications

General

HDMI Input	1
HDMI Output	1
Category	Projector Accessories
Ethernet	Yes
Wireless	IEEE 802.11 a/b/g/n
Compatibility	Windows, macOS, Android, iOS
Connectors	HDMI, Ethernet
USB	2 x USB (rear)