R5911227 /02 Coronis Fusion 4MP / 6MP 15
2. Turn on the computer connected to your display.
If you have properly installed your display and display controller, the Windows start-up messages will appear
once the boot procedure is finished.
Your Coronis Fusion 4MP / 6MP display will be running in a basic video mode at a default refresh
rate when first time starting up. If you are using a Barco display controller, please consult the
dedicated user guide available on the system CD to install the drivers, software and documentation.
When this is done, your display will automatically detect the connected video input signal(s) and
apply the correct video mode and refresh rate.
Installation
To Next Page
Loading...
Need help?
General