Need help?Do you have a question about the Barco MDMG-5221 and is the answer not in the manual?
Overview of the Mammo Tomosynthesis Display and its key features.
Lists all the items included in the product package.
Identifies and describes the front-facing controls and indicators of the display.
Details the connectors and ports located on the rear of the display unit.
Explains the function and features of the adjustable display stand.
Lists and describes essential accessories for the display system.
Details the keyboard light accessory and its mounting instructions.
Step-by-step guide for physically mounting the displays onto the stand.
Instructions for mounting the display using VESA standard compatible arms.
Guide on connecting video input signals like DisplayPort and DVI.
Best practices for managing and routing display and power cables.
How to adjust the angle and alignment of the dual display setup.
Instructions for attaching the film clip accessory to the display.
Instructions for attaching the keyboard light accessory to the display.
Initial setup and startup procedure for the display system.
Best practices for display usage to optimize performance and lifespan.
Explains the meaning and behavior of the display's indicator lights.
How to put the display into and take it out of standby mode.
Details the I-Luminate feature for enhanced brightness boost.
Explains the RapidFrame feature for reducing motion blur.
Steps to access the On-Screen Display (OSD) menu.
How to navigate and operate within the OSD menu system.
How to change the on-screen location of the OSD menu.
How to select the desired language for the OSD menu.
How to enable or disable the automatic closing of the OSD menu.
How to control the visibility of the power status indicator light.
How to configure the behavior of the illuminated keys.
How to activate the power lock to prevent accidental power-offs.
How to enable Ethernet communication via the USB connection.
How to enable USB connectivity for data transfer.
How to enable Display Power Management System for energy saving.
How to enable hibernation for further power reduction.
How to set the default mode for I-Luminate boost.
How to adjust the position of the I-Luminate rectangle.
How to set a specific luminance level for the display.
How to switch between diagnostic and text viewing modes.
Explanation of display functions like Gamma and DICOM.
How to enable ALC to adjust brightness based on ambient light.
How to select a reading room type for ALC calibration.
How to enable continuous ALC for dynamic ambient light adjustment.
Overview of Embedded QA for display calibration and compliance testing.
How to retrieve information on DICOM compliance status and settings.
How to start a DICOM compliance check for the display.
How to perform DICOM calibration to improve the DICOM curve.
How to restore the original DICOM calibration settings.
How to set the threshold for DICOM compliance checks.
How to enable/disable image scaling for pixel multiplication.
Information on available video input signals and manual selection.
Explanation of different video encoding modes like Standard, HDR, Dual 10.
How to select grayscale conversion modes for display output.
How to set EDID timings like refresh rate, orientation, and color depth.
How to access display serial number, firmware, and other information.
How to retrieve information about display status, calibration, and connections.
Detailed instructions and precautions for cleaning the display safely.
General safety recommendations, electrical hazards, and modifications.
Information on proper disposal of electronic waste according to regulations.
Details on hazardous substances and RoHS compliance for China.
Information on product usage indications and regulatory compliance.
Information on electromagnetic emissions and immunity compliance standards.
Defines common symbols found on the device and power supply.
Disclaimer regarding technical accuracy, software, and trademarks.
Overview of product specifications like acronym and screen technology.
Information on open source software components and their usage licenses.
To Next Page
General
