Need help?Do you have a question about the Barco MDCG-10130 and is the answer not in the manual?
General| Brightness | 1000 cd/m² |
|---|---|
| Aspect Ratio | 16:10 |
| Input Voltage | 100-240V AC |
| Storage Temperature | -20°C to 60°C |
| Panel Type | IPS |
| Contrast Ratio | 1000:1 |
| Color Gamut | Adobe RGB |
| Connectivity | DVI, DisplayPort |
| Viewing Angle | 178° (H) / 178° (V) |
| Operating Temperature | 0°C to 40°C |
Overview of the Coronis Fusion 10MP display, its features, and technology.
Lists the items included in the Coronis Fusion 10MP package.
Identifies and describes the controls and connectors on the front of the display.
Identifies and describes the connectors on the rear of the display.
Instructions on how to remove the connector compartment and display stand covers.
Steps to remove the height lock hook for adjusting display position.
Guide on how to tilt, swivel, raise, and lower the display.
Instructions for connecting DVI, DisplayPort, and USB cables to the display.
Steps for connecting power, routing cables, and re-attaching covers.
Warnings and guidelines for mounting the display using a VESA arm.
Steps to perform for the initial startup of the Coronis Fusion 10MP.
Tips for optimizing display lifetime, avoiding image retention, and user comfort.
How to activate indicator lights and switch the display between modes.
Method to access the On-Screen Display (OSD) menus using keys or control wheel.
How to navigate and interact within the OSD menus using keys or control wheel.
How to change the OSD menu position and display language.
How to enable or disable the automatic closing of the OSD menu.
How to enable/disable and configure the power status indicator light.
How to configure the behavior of the key indicator lights.
How to enable/disable the power lock feature.
How to enable or disable the sound made by the keys.
How to enable/disable Ethernet over USB and manage USB communication.
How to enable/disable Display Power Management System (DPMS) mode.
How to set the desired luminance target for the display.
Explanation and selection of Diagnostic and Text viewing modes.
Explanation of Native, Dynamic Gamma, and DICOM display functions.
How to enable/disable Ambient Light Compensation (ALC).
How to enable/disable Continuous ALC and image scaling.
How to select Automatic, One Image Source, or Two Image Sources modes.
How to manually select video input signals (DisplayPort, DVI).
Explanation and selection of Standard, HDR1, HDR2, Dual 10, and Automatic video encoding.
How to select grayscale conversion modes (No Conversion, Use Red/Green/Blue/All Channels).
How to manually set EDID timings (Resolution, Refresh Rate, Color Depth).
How to view display information and retrieve its current status.
Step-by-step instructions for repacking the display for shipping or storage.
Guidelines and precautions for cleaning the display screen and body.
General recommendations, electrical shock precautions, and non-patient care warnings.
Information on transient over-voltage, power cords, water/moisture, ventilation, and installation.
Disposal information (WEEE), Mercury Notice, and Turkey RoHS compliance.
Usage indications, FCC Class B compliance, and Canadian notice.
General EMC information, emissions test results, and electromagnetic immunity.
Explanation of various symbols found on the device and power supply.
Disclaimer notice, trademarks, copyright, and patent information.
Detailed technical specifications of the Coronis Fusion 10MP display.
Information regarding Open Source Software components used in the product.
To Next Page
