8. Important information
8. IMPORTANT INFORMATION
8.1 Safety information
General recommendations
Read the safety and operating instructions before operating the device.
Retain safety and operating instructions for future reference.
Adhere to all warnings on the device and in the operating instructions manual.
Follow all instructions for operation and use.
Electrical Shock
• Do not modify this equipment without authorization of the manufacturer.
• No user-serviceable part inside. The equipment should be opened only by qualified service personnel.
Type of protection (electrical):
Display with external power supply: Class I equipment.
Degree of safety (flammable anesthetic m ixture):
Equipment not suitable for use in the presence of a flammable anesthetic mixture with air or with oxygen
or nitrous oxide.
Non-patient care equipment
• Equipment primarily for use in a health care facility that is intended for use where contact with a patient
is unlikely (no applied part).
• The equipment may not be used with life support equipment.
• The user should not touch the equipment, nor its signal input/output ports and the patient at the same
time.
Power connection – Equipment with external 24 VDC power supply
• Power requirements: The equipment must be powered using the delivered medical approved 24 VDC
(
) SELV power supply.
• The medical approved DC (
) power supply must be powered by the AC mains voltage.
• The power supply is specified as a part of the ME equipment or combination is specified as a ME
system.
• To avoid the risk of electric shock, this equipment must only be connected to a supply mains with
protective earth.
• The equipment should be installed near an easily accessible outlet.
• The equipment is intended for continuous operation.
K5902031 CORONIS FUSION 10MP 28/08/2013
37
To Next Page
Loading...
Need help?
General
