EasyManuals Logo

Barco MDCG-10130 User Manual

Barco MDCG-10130
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
5. Advanced operation
5.7 Keys sound
About keys sound
By default, the keys will make a “beep” sound on every touch. However, this sound can be disabled so
that no sound will be heard when using the keys.
To enable/disable the keys sound:
1. Bring up the OSD main menu.
2. Navigate to the Conguration > User Interface > Controls menu.
3. Enter the Sound submenu.
4. Select Enabled/Disabled as desired and conrm.
5.8 Ethernet ove r USB
About Eth. over USB
By default, the Ethernet over USB will be disabled. This does not disable the USB hub and still allows
to make use of the display’s USB downstream connectors and any external devices connected to it (key-
board,mouse,...).
Please note that a connection from a PC USB downstream connector to the display’s USB upstream
connector is required to be able to use this functionality.
By enabling the Ethernet over USB, you allow the internal Coronis Fusion 10MP processor to communi-
cate directly over USB with the connected PC.
Enabling the Ethernet over USB is only recommended when y ou are using a non-Ba
rco
display contr oller. If you are using a Barco display controller, this c ommunication will
automatically be done over the connected video cable(s).
To enable/disable the eth. over USB:
1. Bring up the OSD main menu.
2. Navigate to the Conguration > Connectivity menu.
3. Enter the Eth. over USB submenu.
4. Select Enabled/Disabled as desired and conrm.
5.9 USB
About USB
By default, USB will be enabled. This will allow the connected PC to communicate directly over USB with
the internal Coronis Fusion 10MP processor.
By disabling USB, communication between the internal Coronis Fusion 10MP processor and the con-
nected PC will not be possible. This does not disable the USB hub and still allows to make use of the
display’s USB downstream connectors and any external devices connected to it (keyboard, mouse, ...).
Please note that a connection from a PC USB downstream connector to the display’s USB upstream
connector is required to be able to use this functionality.
K5902031 CORONIS FUSION 10MP 28/08/2013
21

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Barco MDCG-10130 and is the answer not in the manual?

Barco MDCG-10130 Specifications

General IconGeneral
BrandBarco
ModelMDCG-10130
CategoryMonitor
LanguageEnglish

Related product manuals