6. Repackaging instructions
6.1 Rep ackin g your display
How to repack your display
1. Place the empty box on a stable surface.
2. Slide the system CD and user guide in the dedicated bag attached at the inside of the box.
3. Place the bottom buffer in the box.
4. Put the power supply in the dedicated cavity of the bottom buffer.
5. Put the Coronis Fusion 10MP display in its original bag and place it in the box with its panel facing
downwards.
6. Put the top buffer on top of the display.
7. When applicable, slide the display controller box in the dedicated cavity of the buffers.
8. Put all cables (video, USB, power) in their original bag and slide them in the dedicated cavity of the
buffers.
9. Close and seal the box.
K5902031 CORONIS FUSION 10MP 28/08/2013
33
To Next Page
Loading...
Need help?
General
