EasyManuals Logo

Barco MDCG-10130 User Manual

Barco MDCG-10130
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
5. Advanced operation
5.12 Viewing modes
About viewing modes
The Coronis Fusion 10MP can be used in two viewing modes:
Diagnostic This mode provides the full calibrated luminance
and is intended for using the display for diagnostic
purposes.
Text In this mode, the luminance is reduced to
approximately half of the luminance. This
is intended for using the display with ofce
applications such as word processing.
Please note that text mode is not persistent, once
powered off, the unit will restart in diagnostic mode.
As the Coronis Fusion 10 MP is intended t o be used in a diagnostic environment, the
diagnostic mode should always be selected.
To select a viewing mode:
1. Bring up the OSD main menu.
2. Navigate to the Conguration > Calibration menu.
3. Enter the Viewing Mode submenu.
4. Select Diagnostic/Text as desired and conrm.
5.13 Display fu nction s
About display functions
Native, uncorrected panels will display all grayscale/color levels with luminance increments that are not
optimal for crucial diagnostic information. Studies have shown however, that in medical images certain
grayscale/color parts contain more diagnostic information then others. To respond to these conclusions,
display functions have been dened. These functions emphasize on these parts containing crucial diag-
nostic information by correcting the native panel behavior.
Native
If you select Native, the native panel behavior will
not be corrected.
Dynamic Gamma 1.8
Dynamic Gamma 2.2
These are gamma functions that are shifted to take
into account the non-zero luminance of an LCD
panel when driven with a “black” signal. They are
especially useful in CT applications to improve the
perception of low Hounseld values.
DICOM DICOM (Digital Imaging and Communications
in Medicine) is an international standard that
was developed to improve the quality and
communication of digital images in radiology.
In short, the DICOM display function results in
more visible grayscales in the images. Barco
recommends selecting the DICOM display function
for most medical viewing applications.
K5902031 CORONIS FUSION 10MP 28/08/2013 23

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Barco MDCG-10130 and is the answer not in the manual?

Barco MDCG-10130 Specifications

General IconGeneral
BrandBarco
ModelMDCG-10130
CategoryMonitor
LanguageEnglish

Related product manuals