3. Display installation
3. DISPLAY INSTALLATION
Prior to installing your Mammo Tomosynthesis and connecting all necessary cables,
make sure to ha ve a suitable display controller physically installed in your computer. If
you are using a Barco display controller, please consult the user guide delivered with it
to do this.
For a list of compatible dis play controllers, please refer to the latest v ersion of the com-
patibility matrix available on m
yBarco.com (myBarco > My Support > Healthcare > Com-
patibility Matrices > Barco Systems Compatibility Matrices).
3.1 Mounting the displays
Using the dual tilt & swivel foot
1. Unpack the dual tilt & swivel foot and place it on a solid surface.
2. Unpack the first display.
1
2
3. Hold the display slightly angled with the logo downwards and position the top of the mounting anchor,
at the back of the display,
perfectly aligned on the top of the mounting clamp of the foot.
4. Push the downside of the display gently backwards until the mounting clamp locks into the mounting
anchor.
5. Verify that mounting clamp and mounting anchor are perfectly fitting and that the display is firmly
mounted.
6. Repeat step 2 to 5 for the second display.
Caution: Limit transportation distances of the mounted displays and foot system.
K5902035 MAMMO TOMOSYNTHESIS 07/12/2017
9
To Next Page
Loading...
