3. Display installation
Warning:Be aware that the DP connector is equipped with a cable latch, locking the connector to the
display.
To unplug the connector, press the button on the connector during removal.
4. If you want to make use of the display’s USB downstream connectors, connect a PC USB downstream
connector to the display’s USB upstream connector.
5. If you have chosen to use the display’s USB downstream connectors, connect a USB device to one of
the downstream connectors.
6. Connect the supplied external DC power supply to the +24 VDC power input of the display.
7. Plug the mains connector of t
he external DC power supply to a grounded power outlet by means of
the supplied power cable.
8. Re-attach the connector compartment cover. Position the cover with all four bottom lips in the dedicated
spaces on top of the lower back cover. Gently push the top of the cover towards the display while guiding
both release lips into the dedicated spaces.
9. Connect the second display
as detailed in steps 2 to 8.
10.Re-attach the cable cover by sliding it downwards on the foot shaft. Make sure that the displays are
tilted forwards, leaving sufficient space to slide the cover straight down.
11.Attach both arm covers. Position the cover on the arm and gently push it in place.
K5902035 MAMMO TOMOSYNTHESIS 07/12/2017
13
To Next Page
Loading...
