Barco FL35

RTCH
Real Time Clock Hour GP3, GP4
Get, Set
End User
RTCM
Real Time Clock Minute GP3, GP4
Get, Set
End User
RTCS
Real Time Clock Second GP3, GP4
Get, Set
End User
RTCD
Real Time Clock Day GP3, GP4
Get, Set
End User
RTCN
Real Time Clock Month GP3, GP4
Get, Set
End User
RTCY
Real Time Clock Year GP3, GP4
Get, Set
End User
RTCW
Real Time Clock Day of Week GP3, GP4
Get
End User
UMST
Store profile GP3, GP4
Set
End User Profile number (0 - 9)
UMRC
Recall profile GP3, GP5
Set
End User Profile number (0 - 9)
TDSM
Stereo Mode GP3 120Hz, GP4
Get, Set
End User See value table TDSM
TDGT
Glass type GP3 120Hz, GP4
Get, Set
End User
0 - DLP Link™, 1 - IR, 2 - IR
high brightness
TDGD
Genlock phase delay GP3 120Hz, GP4
Get, Set
End User
TDSE
Swap eyes GP3 120Hz, GP4
Get, Set
End User 0 - off, 1 - on
AUXL
Full spectrum mode enable GP3 LED IR
Get, Set
End User 0 - disable, 1 - enable
DISL
RGB LEDs enable GP3 LED IR
Get, Set
End User 0 - disable, 1 - enable
LDMM
LED Dim Mode GP3 LED IR
Get, Set
End User 0 - standard, 1 - custom
LPW1
LED Power GP3
Get, Set
End User
LDCR
LED Dim Custom Red GP3 LED IR
Get, Set
End User
LDCG
LED Dim Custom Green GP3 LED IR
Get, Set
End User
LDCB
LED Dim Custom Blue GP3 LED IR
Get, Set
End User
IBCO
Individual brightness and contrast
offset adjustments
GP3, GP4
Get, Set
End User 0 - disable, 1 - enable
0-RGB, 1-IR
(if available)
BOR0
Brightness offset red GP3 LED IR
Get, Set
End User
BOG0
Brightness offset green GP3 LED IR
Get, Set
End User
BOB0
Brightness offset blue GP3 LED IR
Get, Set
End User
COR0
Contrast offset red GP3 LED IR
Get, Set
End User
COG0
Contrast offset green GP3 LED IR
Get, Set
End User
COB0
Contrast offset blue GP3 LED IR
Get, Set
End User
IR control->RGB adjustments
IR control
Stereo
Profiles
Settings->Set date and time
3. ASCII Command Sets
601-0381-00_GP3/GP4
Sicilium_1_24
12
All manuals and user guides at all-guides.com