Need help?Do you have a question about the Barco FLM R22+ and is the answer not in the manual?
General safety guidelines and precautions for using the manual.
Crucial instructions to prevent electrical shock and other hazards.
Warnings for safe stacking and transporting flight cases.
Environmental and physical conditions for projector installation.
Step-by-step guide for safely removing the projector from packaging.
List of items included in the projector package.
Information on the projector's transport case and its features.
Details on different mounting and projection orientations.
Location and importance of ventilation for the projector.
Instructions for obtaining and installing projector management software.
Description and setup of the projector's remote control.
Information on projector lenses and their selection.
Steps to correctly position and align a table-mounted projector.
Steps to correctly position and align a ceiling-mounted projector.
Instructions for safely suspending the projector using rigging clamps.
Procedure for safely stacking multiple projectors together.
Steps to align the projected image when projectors are stacked.
Guide on connecting the projector to the main power supply.
Information on connecting various signal sources to the projector.
Details on ports and methods for projector communication and control.
Overview of projector control methods using remote and local interfaces.
Explanation of keys and functions for the remote control and keypad.
Basic steps for turning the projector on, off, and to standby.
Instructions on how to operate the projector using the remote control.
Overview of shortcuts for common image adjustments.
Settings for identifying and controlling individual projectors.
How to choose the active video or data input source.
General guide to adjusting image parameters via RCU.
Purpose and capabilities of the projector's adjustment mode.
How to use both control interfaces for adjustments.
Steps to access the projector's adjustment menus.
How to navigate menus and make settings changes.
Using keys for direct access to specific menus.
Differences and usage of on-screen vs. LCD panel menus.
Using built-in patterns for alignment and calibration.
How the projector remembers the last selected menu item.
Structure of the Input menu options.
Information on installed input modules.
Setting up input types and parameters.
Ensuring signal stability by locking to sync sources.
Reducing processing delay for specific applications.
Displaying images at their original resolution.
Configuring transitions between different input sources.
Options for display when no input signal is detected.
Structure of the Image menu options.
Steps to access image settings.
Core adjustments for image quality.
Setting the image display ratio (e.g., 4:3, 16:9).
Adjusting signal timing parameters for optimal display.
Managing stored image configuration files.
Saving current projector settings to internal backup.
Structure of the Layout menu options.
Adjusting the primary display area.
Configuring the Picture-in-Picture display.
Managing saved display layouts.
Setting zoom and focus behavior across layouts.
Structure of the Lamp menu options.
Selecting between Normal and Economic lamp power settings.
Adjusting the output power level of the lamp.
Maintaining consistent light output over time.
Setting the desired light output level for CLO mode.
Viewing information about the installed lamp.
Adjusting lamp position to optimize light output.
Structure of the Alignment menu.
Setting the projector's installation orientation.
Adjusting lens zoom, focus, shift, and mid position.
Correcting image distortion for non-standard projection angles.
Advanced image warping and distortion correction.
Increasing image contrast for video and data sources.
Adjusting edges to frame the image and hide unwanted areas.
Adjusting image gamma for better contrast and detail in dark areas.
Using built-in patterns for measurement and alignment.
Adjusting projector's color gamut.
Advanced feature for blending multiple projector images.
Structure of the Projector Control menu.
Setting unique addresses for individual projectors.
Configuring serial data communication.
Configuring network connectivity for the projector.
Activating or deactivating infrared receivers.
Configuring lighting control via Art-Net protocol.
Customizing functions of control buttons.
Adjusting the on-screen menu display location.
Configuring the projector's front panel display.
Changing the display language for menus.
Structure of the Service menu.
Displaying projector identification and status information.
Accessing projector diagnostic data.
Displaying and adjusting color convergence patterns.
Accessing built-in patterns for service diagnostics.
Resetting projector settings to factory defaults.
Resetting the projector's formatter.
Saving current configurations to backup storage.
Activating the refill process for the cooling circuit.
Enabling special sequences for specific sources.
Saving and loading settings using a USB device.
Procedure for replacing the front dust filter.
Procedure for replacing the bottom dust filter.
Procedure for replacing the top dust filter.
Checking the pressure in the cooling system.
Instructions for safely cleaning the projector lens.
How to clean the projector's outer casing.
Procedure for removing the lamp housing.
Procedure for removing the input/communication module.
Procedure for removing an individual input module.
Procedure for installing the lamp housing.
Procedure for installing the input/communication module.
Procedure for installing an individual input module.
Adjusting lamp position to optimize light output.
Procedure for removing the projector's front cover.
Procedure for removing the projector's side cover.
Procedure for removing the projector's lamp cover.
Procedure for removing the projector's input cover.
Procedure for reinstalling the projector's front cover.
Procedure for reinstalling the projector's side cover.
Procedure for reinstalling the projector's lamp cover.
Procedure for reinstalling the projector's input cover.
Physical measurements of the projector unit.
Physical measurements of the projector's flight case.
Physical measurements of the rigging clamps.
List of pre-programmed standard source file timings.
DMX channel assignments for basic control mode.
DMX channel assignments for extended control mode.
DMX channel assignments for full control mode.
List of projector error codes, descriptions, and actions.
Technical specifications for the FLM R22+ projector.
Technical details for the 5-cable input module.
Technical details for the HDSDI/SDI input module.
Technical details for the DVI input module.
Technical details for the DVI HDCP input module.
List of available spare parts and their order numbers.
To Next Page
General
