Barco FLM R22+ - Picture in Picture Activation; Picture in Picture Source Selection

10. Layout menu
Image 10-24
Position of PiP
A Top position
B Left position
10.3.2 Picture in Picture activation
How to activate PIP?
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Layout and press ENTER.
3. Use the ▲ or ▼ key to select PIP Window and press ENTER.
The PIP window opens.
4. Use the ▲ or ▼ key to select On or Off and press ENTER to toggle between [On] and [Off].
Image 10-25
Image 10-26 Image 10-27
5. Press EXIT to quit the menu.
When PIP is activated (ON state), the PIP window becomes the active window. Switching to the main window
is still possible with the window button on the RCU.
10.3.3 Picture in Picture source selection
What can be done ?
The input source for the picture in picture window can be selected.
How to select a source
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Window and press ENTER.
3. Use the ▲ or ▼ key to select PIP Window and press ENTER.
The PIP window dialog opens.
4. Use the ▲ or ▼ key to select Source and press ENTER.
R59770179 FLM R22+ 15/03/2010
101