5. Connections
10/100 Base-T — RJ45 port
Pin Description
7
—
8
—
USB port
The communication interface is equipped with a master USB port, type “A” connector (H). This USB port will simplify the service
procedures for taking backup fi les from the projector without network connection. An USB-stick is plugged into the USB port and
files can be transferred from or to the projector using the local or remote control unit. Note that the USB-stick has to be FAT16
compatible.
Card bus connector (PCMCIA)
No cards supported yet.
R59770179 FLM R22+ 15/03/2010
41
To Next Page
Loading...
