Need help?Do you have a question about the Barco F80-Q7 and is the answer not in the manual?
General| Placement | Desktop |
|---|---|
| Product type | Large venue projector |
| Product color | Black, Silver |
| Market positioning | Business |
| Heat dissipation | 2900 BTU/h |
| Native aspect ratio | 16:10 |
| Projection distance | - m |
| Projection technology | DLP |
| Contrast ratio (dynamic) | 10000:1 |
| Contrast ratio (typical) | 1200:1 |
| Screen size compatibility | - \ |
| Projector native resolution | WQXGA (2560x1600) |
| Zoom capability | Yes |
| Focal length range | - mm |
| Light source type | Laser |
| Service life of light source | 40000 h |
| Analog signal format system | - |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Power source | AC |
| AC input voltage | 100-240 V |
| AC input frequency | 50-60 Hz |
| Power consumption (max) | 850 W |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 700 W |
| Noise level | 35 dB |
| Certification | CE, FCC Class A, cNemkoUS, CCC, EAC, KSA, RCM, UkrSEPRO |
| Operating altitude | 0 - 3000 m |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | 10 - 40 °C |
| Storage relative humidity (H-H) | 20 - 90 % |
| Operating relative humidity (H-H) | 20 - 80 % |
Weight and Dimensions| Depth | 680 mm |
|---|---|
| Width | 480 mm |
| Height | 227 mm |
| Weight | 25500 g |
Provides essential guidelines for safe operation and installation of the projector.
Details critical safety measures to prevent injury and equipment damage.
Covers specific safety considerations for Risk Group 3 laser projectors.
Instructions for installing batteries in the remote control unit.
Describes the function of the on/off switch on the remote control.
Details the projector's rear connection panel and its ports.
Provides technical details for various input connectors.
Lists available interfaces for projector control.
Describes the projector's local keypad functions and layout.
Details the different power modes (ON, READY, ECO) of the projector.
Explains how to operate the projector using the remote control unit.
Introduces the projector's On Screen Display (OSD) interface.
Explains how to navigate the OSD menu using the remote or keypad.
Describes how to access and use built-in test patterns for calibration.
Guides users on selecting the active input source for the projector.
Explains how to configure specific settings for each input connector.
Details how to adjust contrast, brightness, and saturation manually.
Explains how to set screen luminance for HDR content.
Instructions for adjusting the lens shift for image positioning.
Covers digital image manipulation to compensate for screen distortion.
Explains how to create seamless transitions between multiple projectors.
Details network setup options, including DHCP and manual IP configuration.
Accessing advanced settings and diagnostics via a service code.
Provides an overview of the status information available in the menu.
Step-by-step guide for cleaning the projector's lens safely.
Information regarding air intake meshes and their cleaning.
Detailed technical specifications for the F80-Q7 model.
Physical dimensions and weight of the F80 projector.
Guidelines for proper disposal of the product and batteries.
Information on hazardous substances in the product according to China RoHS.
To Next Page
