9. GUI – System Settings
3. In the Service menu, select C olor Wheel.
Image 9-10
The Color Wheel menu will be displayed.
Image 9-11
4. Change the values to the desired position.
9.4.2 Service – Color
CAUTION: The native colors have been measured and set during factory p
roduction. Do not change them,
unless parts of the optical p ath h ave b een replaced d ue to servicing.
If you need to chang e t he native colors on the device, make sure to also perform a P 7 calibration, u sing the
Projector Toolset and a chroma meter. For more info on P7 calibration, refer to the Projector Toolset Referen ce
guide.
How to adjust the P7 native settings
1. In the main menu, System Settings → Service.
Image 9-12
2. Enter the service code.
3. In the Service menu, select Color.
Image 9-13
R5906852 F80 SERIES 21/09/2017 63
To Next Page
Loading...
