3. Input & Communication
Param eter Value
Max. pixel rate
330 MHz (dual link), 165 Mhz (single link)
Scan format
Progressive
Max. input data r esolution
1920x1200 60Hz (Single link), 2560x1600 60Hz (Dual
Link).1920x2400 @60Hz
Bit depth 8 bit
EDID
Supported
HDCP Supported
3.4.2 Display Port 1.2
Specifi ca tions
Param eter Value
Connector Standard Display port
Signal characteristics DP 1.2
Functionality Mandatory
Max. cable length 15 m (24 AWG) - RBR;
2m(24AWG)–HBR1,HBR2
Supported Link Rate
RBR, HBR1, HBR2
Scan format
Progressive
Max. input data r esolution
4096x2160 @ 60Hz (4K ) Max
Bit depth 8, 10, 12 bit
EDID
Supported
HDCP Supported
3.4.3 HDMI 2.0
Specifi ca tions
Regarding HDMI 2.0: The decryption protocol HDCP 2.2 are enabled a nd valid in this unit.
Param eter Value
Connector Standard HDM I
Signal characteristics Digital, T MDS
Max. cable length 15 m (24 AWG)
Max. pixel ra te 594MHz
Max. input data resolution 3840x2160 @60Hz
Bit depth 8, 10, 12 bits
EDID Supported
HDCP Supported
Ethernet No
Audio return No
3.4.4 3G-SDI
Specifi ca tions
Param eter Value
Standard SMPTE 424M-2006 10bit level A
R5906852 F80 SERIES 21/09/2017 19