Barco FLM R22+ - Diagnosis; How to Start up the Diagnosis; Versions

14. Service menu
14.3 Diagnosis
What can be seen?
The diagnosis menu gives the possibility to get an overview of the working of the projector.
14.3.1 How to start up the diagnosis?
Start up
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Service and press ENTER.
The service window opens.
3. Use the ▲ or ▼ key to select Diagnosis and press ENTER.
The diagnosis screen will be displayed.
Image 14-5
Image 14-6
Image 14-7
Those menus who contain measured values, indicate also the limits if these are available.
14.3.2 Versions
How to display an overview?
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Service and press ENTER.
The service window opens.
3. Use the ▲ or ▼ key to select Diagnosis and press ENTER.
The diagnosis screen is displayed.
4. Use the ▲ or ▼ key to select Versions and press ENTER.
The Versions overview is displayed.
Image 14-8
Image 14-9
Image 14-10
R59770179 FLM R22+ 15/03/2010 167