13. Projector control
[On] : home lens will be executed during power on.
[Off] : home lens will not be executed during power on.
Image 13-54
Image 13-55
Image 13-56
13.7 Buttons
Functionality
Some buttons on the RCU or local keypad can have a different functionality depending on the need of the projector owner.
Overview
• Standby button
• APA (auto) button
• Shortcut keys
13.7.1 Standby button
What is possible?
When going to standby by pressing the standby button, the following can happen:
• Only the lamp will be switched off.
• The lamp and the power will be switched off.
How to set
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Projector control and press ENTER.
3. Use the ▲ or ▼ key to select Buttons and press ENTER.
4. Use the ▲ or ▼ key to select Standby and press ENTER to toggle between [Lamp on/off] and [Power up/down].
Image 13-57
Image 13-58
Image 13-59
158 R59770179 FLM R22+ 15/03/2010
To Next Page
Loading...
