13. Projector control
Image 13-48
Image 13-49
Image 13-50
13.6.5 Art-Net activation
What can be done ?
DMX via Art-Net can be activated [On] or blocked [Off].
Default value : off
How to toggle
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Projector control and press ENTER.
3. Use the ▲ or ▼ key to select ART DMX and press ENTER.
4. Use the ▲ or ▼ key to select ArtNet and press ENTER to toggle between [Off] or [On].
Image 13-51
Image 13-52
Image 13-53
13.6.6 Home lens at startup
What can be done ?
At power On the lens will search for its minimum and its maximum position. These minimum and maximum values will be used
during this sessions to control the lens exactly. Once the lens limits are found, the lens returns to original position.
This full process takes about 3 to 4 minutes. During the homing cycle, all functions in the projector are blocked.
How to set
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Projector control and press ENTER.
3. Use the ▲ or ▼ key to select ART DMX and press ENTER.
4. Use the ▲ or ▼ key to select Home lens at startup and press ENTER to toggle between [On] or [Off].
R59770179 FLM R22+ 15/03/2010 157
To Next Page
Loading...
