14. Service menu
The convergence pattern is displayed. Press ENTER to toggle to another pattern. Press EXIT to return to the menu.
Image 14-35
Image 14-36
Image 14-37
5. To adjust the convergence of the selected pattern, use the ◄ or ► for a horizontal adjustment and ▲ or ▼ for a vertical adjust-
ment.
Image 14-38
Image 14-39
Adjust until the crossing of the center Green (Red) convergence pattern coincide with the diagonal line of the center Blue con-
vergence pattern.
14.5 Internal service patterns
How to select
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Service and press ENTER.
The service window opens.
3. Use the ▲ or ▼ key to select Internal service patterns and press ENTER.
R59770179 FLM R22+ 15/03/2010
173
To Next Page
Loading...
