EasyManua.ls Logo

Barco FLM R22+ - Specifications FLM DVI HDCP input

Barco FLM R22+
243 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22. Specifications
On board display server
Ethernet control standard
remote control projector over ethernet via Projector Toolset
Outputs
HDSDI/ SDI loop out
Communication
• 1x RS-232C IN (D-9 connector)
• 1x RS-232C OUT (D-9 connector)
• 1x RS-232C IN (XLR connector)
• 2x prop. protocol (RJ45 connector)
• xlr and mini-jack for wired remote control
Compatibility
• All current video sources (PAL, SECAM, NTSC) in Composite, S-VHS, Component or RGB formats
• All current HDTV sources
• All computer graphics formats from VGA, SVGA, XGA, SXGA, full HD, UXGA to QXGA
• Most Macintosh computers
• Electronic workstations with a resolution up to QXGA (2048 x 1536 pixels at 60 Hz)
• Most computer sources with a pixel clock up to 300 MHz
• DVI sources up to DC2K (2048x1080)
Power Dissipation
max 11953BTU/h
Features
• Picture in picture
• Seamless switching with effects
• Standard light shutter
• Rigging point
• Carrying handle
• High contrast mode
• P7 color processing
Screen size
From 1-12m / 3-39ft.recomended
Scan Frequencies
Pixel clock >162Mhz (QXGA 60hz)
Lens encoders
On zoom and focus (with TLD lenses)
Safety Regulations
Compliant with UL1950 and EN60950
Electromagnetic Interference
Complies with FCC rules & regulations, part 15 Class A and CE EN55022 Class A
Lenses
Lens
Order nr
TLD (HB) 0.8
R9842040
TLD (HB) 1.2
R9840770
R59770179 FLM R22+ 15/03/2010 223

Table of Contents