3. Display installation
3. Keep the clip in the dedicated hole in case the display needs to be shipped later.
To retain the hook for possible future transportation, insert the short, red end of the
hook back into the stand of your display.
3.3 Adjusting th e disp lay po sition
Now that the height-positioning system of your display is unloc
ked, you can adjust the
display position.
To adjust the display position
1. Tilt, swivel, raise and lower the display as desire
d.
K5902055 CORONIS FUSION 6MP 14/11/2014 9
To Next Page
Loading...
