3. Display installation
CAUTION: Do not try to pivot y our display when attached to the stand. Trying to do so
could cause serious damage to your display and its stand.
3.4 Conn ecting the sign al cables
To get access to the connectors, remove the connector compartment cover. See "Re-
moving the covers", page 7 .
Each side of your display can have a different video input connected (one side can have
DVI connected while the other side has DisplayPort connected). Both display sides can
have the s ame video input connected as well but only one video input is allowed on each
side of your display.
To connect the signal cables to the display:
1. Connect one head of the display controller to the DVI 1 or DisplayPort 1 connector with one of the
supplied DVI or DisplayPort cables.
2. Connect another head of the display controller to the DVI 2 or DisplayPort 2 connector with one of the
supplied DVI or DisplayPort cables.
3. If you want to make use of your display’s USB downstream connectors, connect a PC USB downstream
connector to the display’s USB upstream connector by means of the supplied USB 2.0 cable.
10
K5902055 CORONIS FUSION 6MP 14/11/2014
To Next Page
Loading...
