5. Advanced operation
3. Enter the Color Presets submenu.
4. Select one of the available Color Presets and confirm.
5.14 Color temperatu re
About color temperature:
It is possible to change the color temperature of your display.
Color temperature can only be changed on your di splay when color presets is set to
user. Therefore, please refer to "Color presets", page 23 to do this.
To change the color temperature:
1. Bring up the OSD main menu.
2. Navigate to the Configuration > Calibration > Color Settings menu.
3. Enter the Colo r Definition submenu.
4. Select Color Temperature and confirm.
5. Enter the Color Temperature submenu.
6. Set the Temperature value as desired and confirm.
5.15 Color coordinat es
About color coordinates:
It is possible to change the color coordinates of your display.
Color coordinates can only be changed on your display when color
presetsissetto
user. Therefore, please refer to "Color presets", page 23 to do this.
To change the color coordinates:
1. Bring up the OSD main menu.
2. Navigate to the Configuration > Calibration > Color Settings menu.
3. Enter the Colo r Definition submenu.
4. Select Color Coordinates and confirm.
5. Enter the x and/or y submenu.
6. Set the coordinate value for x and/or y as desired and confi rm.
5.16 Viewing modes
About viewing modes
The Coronis Fusion 6MP can be used in two viewing modes:
24
K5902055 CORONIS FUSION 6MP 14/11/2014
To Next Page
Loading...
