Need help?Do you have a question about the Barco RLM W8 and is the answer not in the manual?
General| Matrix size | 0.67 \ |
|---|---|
| Heat dissipation | 2900 BTU/h |
| Projection distance | - m |
| Projection technology | DLP |
| Contrast ratio (dynamic) | 3000:1 |
| Contrast ratio (typical) | 2200:1 |
| Digital gamma correction | Yes |
| Screen size compatibility | - \ |
| Projector native resolution | WUXGA (1920x1200) |
| Aspect ratio | 16:10 |
| RS-232 ports | 1 |
| Dimensions (WxDxH) | 516.7 x 669.74 x 247 mm |
| Connectivity technology | Wired |
| Maximum analog resolution | 1600 x 1200 pixels |
| Maximum digital resolution | 1920 x 1200 pixels |
| Focal length range | - mm |
| Vertical lens shift range | 0 - 100 % |
| Horizontal lens shift range | -30 - 30 % |
| Lamp power | 330 W |
| Lamps quantity | 2 lamp(s) |
| Light source type | Lamp |
| Service life of light source | 1500 h |
| Service life of light source (economic mode) | 2000 h |
| Noise level | 39 dB |
| Preset modes | sRGB, Standard |
| Certification | FCC, CE EN55022 Cl. A, CE, TUV, WEEE. |
| Dot clock scanning frequency | 165 MHz |
| Analog signal format system | NTSC |
| Supported graphics resolutions | 1600 x 1200 (UXGA), 1920 x 1200 (WUXGA) |
| Built-in speaker(s) | No |
| BNC input ports | 5 |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | 0 |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Placement | Desktop, Ceiling |
| Product type | Large venue projector |
| Product color | Black |
| Market positioning | Presentation |
| Power source | AC |
| AC input voltage | 90 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 2 W |
| Power consumption (typical) | 850 W |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 0 - 80 % |
| Cables included | AC, HDMI-DVI |
| Remote control type | IR |
| Sustainability certificates | RoHS |
Weight and Dimensions| Depth | 669.74 mm |
|---|---|
| Width | 516.7 mm |
| Height | 247 mm |
| Weight | 26000 g |
| Package weight | 30000 g |
Overview of the projector's features and cleaning instructions for the unit, lens, and filters.
Step-by-step guide for safely replacing the projector's lamp module.
Essential safety precautions and guidelines for performing service on the projector.
Detailed technical parameters of the BARCO RLM W8 projector, including dimensions and inputs.
Visual representation of the projector's operational states and transitions.
Explanation of LED indicators and a list of error codes with their descriptions.
Procedures for debugging projector errors using various methods.
Instructions for operating the projector using the remote control, including IR codes.
Procedures for downloading and installing software and firmware updates for the projector.
Details on RS-232 interface, requirements, and operational commands for projector control.
Schematic overview of projector functions and the power supply circuit.
Step-by-step guides for disassembling and replacing various internal projector components.
Diagram and list identifying the location and function of all fans within the projector.
List of projector spare parts with corresponding images and descriptions.
Instructions for safely unpacking the projector unit and its accessories.
Detailed steps for disassembling and reassembling the projector lens module.
To Next Page
