Need help?Do you have a question about the Barco RLM-W14 and is the answer not in the manual?
Safety precautions for disassembling and assembling the projector.
Safety precautions related to the projector lamp.
Safety warning regarding looking into the projector lens.
Technical specifications of the projector's performance.
Functional block diagram of the projector's boards.
Details of fan locations and their specifications.
Interface requirements and system operation commands for RS-232.
Definition and list of error codes with troubleshooting steps.
Instructions for removing the right and left covers of the projector.
Steps for removing the top cover of the projector.
Procedure for removing and replacing the W2 board module.
Steps to remove and replace the main formatter board.
Instructions for replacing the Fan C board.
Procedures for replacing multiple boards.
Steps for replacing video and DVI boards.
Procedures for replacing fans, filters, and lamps.
Steps for replacing ballast, DC-DC, AC filter, power boards, and fans.
Procedure for replacing the motor driver board and lens mount.
Diagram showing the layout of all projector modules.
Steps to download firmware to the main formatter board.
Procedure for downloading firmware to the sxW2 board.
Steps to download firmware to the RJ-45 board via web interface.
Steps to recover the NXP MCU using a specific procedure.
Procedure for downloading firmware to the motor board.
Steps to download firmware to the ballast.
Procedure for downloading firmware to the HDBaseT board.
Confirming software revision via OSD or RS-232 after updates.
Procedure for adjusting FIP convergence (CG).
Steps for adjusting the folding mirror.
Procedure for performing P7 color calibration.
Steps for adjusting the projector's focus.
Guide to cleaning the projector's cabinet.
Instructions for cleaning the projector lens.
Information on cleaning projector filters.
Detailed cleaning instructions for optical components.
General guidelines for replacing consumable parts.
Procedure for replacing the projector lamp.
Instructions for replacing the projector filter.
Details of the full set unit packaging for the projector.
List and images of included accessory parts.
Information regarding the projector's carton packaging.
Explanation of serial number and label information.
Details on air and sea shipping packaging for the projector.
To Next Page
General
