Barco RLM-W14 - 4-9 Fan B Board & Filter & Lamp 1 & Lamp 2 & Fan 2 & Fan 3

50 of 149
4-9 Fan B Board & Filter & Lamp 1 & Lamp 2 & Fan 2 & Fan 3
Unplug the 5 connectors, and loosen 2
screws on the Fan B Board.
Take out the Fan B Board.
Loosen 2 screws on the ventilation slot of rear
cover. Then, open the cover.
Take out the filter.
Loosen 2 screws on the ventilation slot of
front cover. Then, open the cover.
Take out the filter.