Barco RLM-W14 - 6-4. Focus Adjusting

112 of 149
6-4. Focus Adjusting
(A)
(B)
Rotate the ring of Zoom & Focus. Because it makes the distance is 4 m from screen to Lens and
make sure image is square by moving projector, please make three label mark to align the one
line.
Focus
Zoom
Switch to “ME” testing pattern to adjust focus. Use 13 mm Inner Hexagon Sleeve Screwdriver and
2.5 mm Inner Hexagon Screwdriver to adjust the top and right adjusting screws of Lens Mount to
make top and bottom focus of whole image clearly. And, then adjust flare to make pixel of whole
image clearly.