Barco RLM-W14 - Page 113

113 of 149
(C)
(D)
They can't appear gap.
Use 13 mm Inner Hexagon Sleeve Screwdriver and 2.5 mm Inner Hexagon Screwdriver (12
kg-f-cm) to screw up tightly 4 pcs rotating wheels of fixing focus screws. The surface of
rotating wheels will touch the brace. But, they can’t appear gap and the rotating wheel still
slide.
Before adjusting right and left image focus, please use M5 cross screwdriver to loose
slightly 4 pcs fixing Lens Mount screws (Please don’t loose too much because Lens
Mount will shake).