Need help?Do you have a question about the Barco HDX and is the answer not in the manual?
Covers general safety guidelines, instructions, and warnings.
Critical instructions to prevent electrical shock and personal injury.
Warnings for stacking and transporting HDX rental flight cases.
Physical environment, cooling, and air quality requirements for projector installation.
Procedures for safely unpacking and inspecting the projector for transit damage.
Flight case details and various projector mounting configurations.
Introduction to the RCU, including battery installation, case, and adaptor.
Information on available lenses, selection process, and installation steps.
Connecting power and aligning the projector for table and ceiling mounts.
Attaching carry handlers and suspending the projector using rigging clamps.
Details on connecting various input sources like DVI, SDI, and 5-cable.
Information on DMX, RS232/RS422, Ethernet, and USB communication ports.
Description of the utility-accessory outlet for DMX controlled accessories.
Operating the projector using the RCU and local keypad, including terminology.
Procedures for powering the projector on, switching to standby, and powering off.
Understanding status LEDs and proper usage of the Remote Control Unit.
Setting projector addresses and selecting input sources.
Adjusting lens parameters and controlling on-screen text boxes.
Direct lens adjustments via RCU and quick Picture-in-Picture setup.
How to quickly select the display language.
Overview of adjustment mode functions and control methods.
Starting the adjustment mode and navigating through settings to make changes.
Menu memory, shortcut keys, and using test patterns for adjustments.
Accessing help information for menu items within the adjustment mode.
Overview of input options and how to select the desired input source.
Configuring advanced settings for DVI, SDI, HDMI/DP, and 5-cable inputs.
Configuring input locking, minimum delay, native resolution, and no signal settings.
Configuring Extended Display Identification Data and managing 3D input modes.
Overview of the image menu and steps to access image adjustments.
Adjusting contrast, brightness, saturation, color temperature, and input balance.
Configuring aspect ratio and adjusting source timings for optimal display.
Managing image files for settings, including loading, deleting, and renaming.
Saving custom settings and configuring the startup splash image.
Overview of layout menu and configuration of the main display window.
Setting up and configuring the Picture-in-Picture window.
Managing layout files: loading, renaming, deleting, and copying.
How lens settings are applied when switching between different layouts.
Overview of lamp settings and selection of power modes (Normal, Eco, Long Life).
Activating Hush Kit for quiet operation and adjusting lamp power output.
Configuring auto dimming and Constant Light Output for lamp management.
Displaying lamp information and adjusting Z-axis for light output.
Overview of alignment options and setting projector orientation.
Adjusting lens zoom, focus, shift, mid position, and performing calibration.
Adjusting image geometry, blanking, and contrast/intensity.
Configuring gamma, color space, image patterns, blending, and 3D settings.
Setting projector addresses and configuring serial communication.
Configuring network, IR control, and DMX communication settings.
Configuring basic settings like buttons, menu, language, and scheduling tasks.
Configuring GSM for SMS control and FLEX light output settings.
Overview of service menu functions and displaying general projector information.
Checking projector status, software versions, measurements, logs, and notifications.
Adjusting convergence, resetting settings, managing USB memory, and refill mode.
Configuring special modes and setting time/date.
Detailed steps for safely cleaning the projector lens.
Instructions for cleaning the projector's housing.
Procedures for installing input modules and servicing the lamp house.
Procedures for removing and mounting front and lamp covers.
Replacing high-density dust filters and cleaning metal front filters.
Detailed physical dimensions and center of gravity for the HDX projector.
Technical specifications for the HDX W12 projector model.
Technical specifications for the HDX W14 projector model.
Technical specifications for the HDX W18 projector model.
Technical specifications for the HDX W20 FLEX projector model.
A table listing pre-programmed standard image files and their technical parameters.
Basic DMX channel mappings, values, and actions for projector control.
Full DMX channel mappings, values, and actions, including brightness and contrast.
Extended DMX channel mappings for lens control and lamp power.
How to mount the stacking points on projector corners for secure stacking.
Procedures for stacking projectors and aligning them using hatch patterns.
Guidelines for proper disposal of electronic waste and product batteries.
Compliance details for hazardous substances according to Chinese and Turkish regulations.
Manufacturing locations of Barco NV and Barco Visual (Beijing).
To Next Page
General
