11. Lamp
11.9 CLO targets
What must be done?
The light output target can be set. This value will force the projector to produce the target lumens when the CLO mode is set to On.
How to set the target
1. Press Menu to activate the menus and select Lamp → Power → CLO mode.
Image 11-25
Main menu, lamp
Image 11-26
Lamp, power
Image 11-27
CLO Target lumens setup
2. Use the ◄ or ► key to change the CLO target lumens.
Depending on the projector model, the value range can be different. The screenshot is only given as information. For the exact
values, see the specifications of the specificprojector.
11.10 LPS power
What is indicated ?
The current LPS power in watt is indicated as information.
R5905032 HDX SERIES 20/11/2014
161
To Next Page
Loading...
